Hefei Yuanzhi Automation Technology Co., Ltd - Product - Air Leak Tester

Product Introduction：

The ZA201 is a reliable and reliable instrument with high test accuracy and the most reliable seal.

The maximum test pressure is 100Kpa

Touch screen display and operation

Test pressure arbitrary selection function

Waterproof, oil, dust, etc.

Fully imported configuration, cartridge mounting, good stability

Related Products：

technical Parameter：

Display unit	Test pressure	kPa，Mpa、bar，PSI
	Leakage	kPa
Mainframe size	312（L）×277（W）×155（H） Footing 12mm
Precision guarantee range	±1%～±5%F.S
Precision resolution	0.1kPa
Test pressure range	10～100kPa
Test time	0~999sAdjustable
Leakage	The number of digits is 3, and the number of decimal digits is 2. Display sampling frequency 10HZ
Parameter channel number	32group（1～32）
Time setting	0～999s
Hardware	32bitCPU
Power Supply	AC220V±5%，50HZ
Pressure source	In general, dry clean air using 0.1~0.2MPa higher than the test pressure.
ambient temperature	The temperature is 5~40 centigrade. The preservation temperature is -20 ~ 70 C
Humidity	80%RH, below, no condensation
Control the IO interface	Open circuit collector specification interface and relay output
Remarks

Note: the single side height of both sides screws is 2mm

Performance Characteristics：

5.4-inch touch screen display, Chinese operation interface is clear and easy to understand;

Check the waveform diagram to facilitate analysis of the inspection process;

Resolution <0.1kPa>;

Multi-channel parameters, the parameter channel selection and setting can be easily performed;

8 output control, 8 control inputs;

With manual test mode and automatic test mode;

With serial RS232 level output;

The

remote control contacts are rich, can be connected to the PLC, and can

also directly drive external devices (such as cylinders);

The output terminals can be manually adjusted to make external control more flexible;

The

bubble-coating function, that is, when the soapy water is soaked in

water to visually detect the bubbles, the instrument maintains a

pressure-holding state;

The latest 10000 sets of test data can be saved, and the test results can be queried by date;

Leak detection result data, automatically stored;

Rich in data statistics and analysis functions;

With power-off memory protection

Quality analysis: Analyze and classify product quality by analyzing and categorizing the products tested

Leakage

calculation: Simple and fast calculation of differential pressure

leakage values and flow leakage values to help process and operators

quickly calculate leak data.

Low voltage test: DC24V safe voltage

Additional charges are required:

Use U disk to export data function; export data to EXCEL, easy to edit on computer

Direct drive printer or wireless scanner (designated model)

Data Download：