KZKL series quick connector technical parameters

Working pressure: inlet B: from vacuum to a maximum of 50 bar, depending on the application range, can also provide higher pressure values according to customer needs.

Design: The main structural components of the seal are made of corrosion-resistant stainless steel.

Seal: The seal is made of nitrile rubber (NBR) and can be supplied with other materials according to customer requirements.

Leakage rate: 10-3 mbar × 1 / s (10-4Pa × m3 / s)

*This is the standard minimum leak rate, we can provide lower leakage rate devices on demand, depending on the detailed specifications (test method, test temperature and test pressure) provided by the customer and the quality of the samples provided by the customer (ie sealing surface) Surface treatment conditions, roughness and dimensions allow tolerances).

Operation method:

1. Hold the quick connector sliding sleeve with your hand and align it with the test nozzle;

2. Push the quick connector jacket forward until it stops.

3. The KZKL quick connector is connected here.

Specification size (mm):