Product advantages:

It can seal straight pipes or drilled holes with large tolerances;

Sealing ring adaptation;

There is no damage to the test fittings.

Application range:

Achieve rapid sealing tests on straight pipe, pressure and vacuum of drilled parts.

Test steps:

1. Insert the quick connector into the test piece;

2. Rotate the quick connector handle by 90° to achieve the connection seal, and then apply the test pressure;

3. At the end of the test, the quick connector is rotated back to 90° to remove.

Working pressure:3bar (maximum)

Leakage rate:10-4 mbar × l / s (10-5Pa × m3 / s)

*This is the standard minimum leak rate, we can provide lower leakage rate devices on demand, depending on the detailed specifications (test method, test temperature and test pressure) provided by the customer and the quality of the samples provided by the customer (ie tested) Surface finish, roughness and dimensional tolerances).

Operating temperature: +5°C～+80°C

Sealing medium:no fuel,Dry air or other non-corrosive gases

Drive mode:Handle drive

Body material:The shape of the product body is aluminum alloy (surface treatment: anodizing)

Sealing material:Nitrile rubber (NBR), other materials can be selected according to demand

Standard sizes:（mm）