Technical parameters of the WBM series

Product advantages:

Sealing straight pipes with small aeration holes;

It can seal straight pipes with large tolerances;

Sealing ring adaptation;

There is no damage to the test fittings.

Scope of application: Quick sealing test for pressure and vacuum on straight pipes, flanged pipes and fish scale pipes.

Instructions:

1. Insert the test piece into the WBM series quick connector;

2. Rotate the quick connector handle by 90° to achieve connection and sealing;

3. Apply test pressure;

4. At the end of the test, the quick connector is rotated back to 90° to remove.

Working pressure: 3bar (maximum)

Leakage rate: 10-4 mbar × l / s (10-5Pa × m3 / s)

*This is the standard minimum leak rate, we can provide lower leakage rate devices on demand, depending on the detailed specifications (test method, test temperature and test pressure) provided by the customer and the quality of the samples provided by the customer (ie sealing surface) Surface treatment conditions, roughness and dimensions allow tolerances).

Working temperature: +5 ° C ~ +80 ° C

Sealing medium: no oil, dry air or other non-corrosive gases

Drive mode: handle drive

Body material: The product body is aluminum alloy (surface treatment: anodizing)

Sealing material: Nitrile rubber (NBR), other materials can be selected according to requirements

Specification size (mm):