Hefei Yuanzhi Automation Technology Co., Ltd - Product - Air Leak Tester

A830 Air Leak Tester

Product Introduction：

The A830 pressure series is an instrument with stable and reliable performance, high test accuracy and most reliable sealing.

The maximum test pressure is 300Kpa

Touch screen display and operation

Test pressure arbitrary selection function

Waterproof, oil, dust, etc.

Fully imported configuration, cartridge mounting, good stability

Share to：

Related Products：

technical Parameter：

NO.	parts	brand
1	5.4 touch color screen	远智
2	Self draining air source filter	SMC
3	Precision manual pressure regulating valve	SMC
4	Solenoid valve and electromagnetic valve seat	festo
5	High precision pressure transmitter	Emerson
6	Inflatable, balanced valve core	Germany
7	Leaking connector	festo
8	chip	32BIT core processor

技术参数

Display unit	Test pressure	kPa，Mpa、bar，PSI
	Leakage	Pa，Pa/s，mL/min
Mainframe size	312（L）×277（W）×155（H）
Resolution accuracy	1PaΩ0.1ML/min
Minimum display	0.1Pa
Display range	0～±1999.9Pa
Precision guarantee range	0～±2000Pa
Sensor range	0～±2000Pa
Test pressure range	5-300kPa
Pressure resistance of sensor	0.6MPa
Leakage volume display	The number of digits is 3, and the number of decimal digits is 1. Display sampling frequency 10HZ


Leaking upper and lower limits	Less than 1999.9Pa
Parameter channel number	32group（0～32）
Time setting	0～999s
Hardware	32bitCPU
Power Supply	AC220V±5%，50HZ
Test pressure source	In general, dry clean air using 0.2~0.3MPa higher than the test pressure.
ambient temperature	The temperature is 5~40 centigrade.
	The preservation temperature is 0 ~ 70 C

Humidity	80%RH, below, no condensation
Control the IO interface	Open circuit collector specification interface and relay output

Note: the single side height of both sides screws is 2mm

Performance Characteristics：

5.4-inch touch screen display, Chinese operation interface is clear and easy to understand;

Check the waveform diagram to facilitate analysis of the inspection process;

Differential pressure resolution, high precision;

Multi-channel parameters, the parameter channel selection and setting can be easily performed;

8 output control, 8 control inputs;

With manual test mode and automatic test mode;

With serial RS232 level output;

The remote control contacts are rich, can be connected to the PLC, and can also directly drive external devices (such as cylinders);

The output terminals can be manually adjusted to make external control more flexible;

The bubble-coating function, that is, when the soapy water is soaked in water to visually detect the bubbles, the instrument maintains a pressure-holding state;

The latest 10000 sets of test data can be saved, and the test results can be queried by date;

Leak detection result data, automatically stored;

Rich in data statistics and analysis functions;

With power-off memory protection

Use U disk to export data function; export data to EXCEL, easy to edit on computer

Direct drive to printer or scanner

Quality analysis: Analyze and classify product quality by analyzing and categorizing the products tested

Leakage calculation: Simple and fast calculation of differential pressure leakage values and flow leakage values to help process and operators quickly calculate leak data.

Low voltage test: DC24V safe voltage

Data Download：

A830 Air Leak Tester